|
Metal Storm Limited was a research and development company based in Brisbane, Australia that specialized in electronically initiated superposed load weapons technology and owned the proprietary rights to the electronic ballistics technology invented by J. Mike O'Dwyer. Metal Storm represented both the name of the company and the technology. == Technology == Metal Storm used the concept of superposed load; multiple projectiles loaded nose to tail in a single gun barrel with propellant packed between them. The Roman candle, a traditional firework design, employs the same basic concept, however, the propellant continues to burn in the Roman candle's barrel, igniting the charge behind the subsequent projectile. The process is repeated by each charge in turn, ensuring that all projectiles in the barrel are discharged sequentially from the single ignition. Various methods of separately firing each propellant package behind stacked projectiles have been proposed which would allow a "single shot" capability more suitable to firearms.〔for example (Scott in 1902 ) and (Broyles in 1974 )〕 J. Mike O'Dwyer, an Australian inventor, observed that these methods did not eliminate the problem of unintended propellant ignition caused by hot gases "leaking" back up the barrel. J. Mike O'Dwyer's original Metal Storm patents demonstrated a method whereby projectiles placed in series along the length of a barrel could be fired sequentially and selectively without the danger associated with unintended propellant ignition. In the original Metal Storm patents, the propellant immediately behind the projectile closest to the muzzle of the gun barrel was ignited by an electronically fired primer, the projectile was set in motion, and at the same time a reactive force acted on the remaining stacked projectiles in the barrel, pushing them backwards. By design, the remaining projectiles would distort under this load, expanding radially against the gun barrel wall. This created a seal, which prevented the hot propellant gases (expanding behind the lead projectile) prematurely igniting the remaining propellant charges in the barrel (blow-back). As each of these propellant charges was selectively (electronically) ignited, the force "unlocked" the projectile in front and propelled it down the gun barrel, and reinforced the radial expansion (and hence the seal) between the projectiles remaining in the barrel and the barrel wall. Subsequent designs discarded the "distorting shell sealing against the barrel" concept in favor of containing the propellant in "skirts" that form the rear part of each projectile. These skirted projectiles differ from conventional shells and cartridge units in that the skirts are part of the projectile, and in that the skirts are open-ended (at the rear). The rearward seal to the skirt is provided by the nose of the following projectile in the barrel. As in the previous design, the firing of a projectile results in a rearward impulse on the remaining projectiles stacked in the barrel. This results in the skirts of the remaining shells in the barrel being compressed against the following shell heads, effectively creating a seal that prevents hot gases in the barrel triggering unintended propellant ignition ("blow-back") along the length of the barrel. Metal Storm also introduced inductive electronic ignition of the propellant, effectively from outside the barrel. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Metal Storm」の詳細全文を読む スポンサード リンク
|